Disclaimer    Site Map    Careers    Media Centre    Contact    About us
Search

Installation products Project Vinyl

 
Seal and Primers

 
026 Euroblock Multi

Solvent-free damp proof membrane for suppressing residual construction moisture in sand/cement screeds.
Solvent-free, easy application, favourable spreading capacity, non-flammable, fast drying.

Article reference: 026 SAP nr: 35355 Package: 10 l. (12.4 kg)
Spreading capacity: First coat (diluted 1:1 with water) approx. 50 g/m². Second and third coat (undiluted) 50-75 g/m² per coat. 
 
044 Europrimer Multi

Universal primer to improve the adhesion of levelling compounds onto all types of absorbent and non-absorbent subfloors.
Universal application, very low VOC-emission, emicode EC1, favourable spreading capacity.

Article reference: 044 SAP nr: 36689 Package: 10 l. (10.1 kg)
Spreading capacity: 100-200 g/m², depending on the application. 
 
049 Europrimer ABS

Primer to improve the adhesion of levelling compounds on absorbent, stony subfloors. For improving the top-layer of absorbent, stony subfloors.
User friendly, non-flammable, favourable spreading capacity, high penetration capacity. Suitable for any type of subfloor that is sound, clean and permanently dry.

Article reference: 049 SAP nr: 34956 Package: 10 l. (10kg)
Spreading capacity: 100-150 g/m², depending on application. 
 
041 Europrimer EL

Primer for reducing the need of using copper strip when installing a conductive floor covering.
Solvent-free, non-flammable, favourable spreading capacity, electrical resistance < 105 Ohm, measured in accordance with DIN 53 276.

Article reference: 041 SAP nr: 37123 Package: 10 l. (10.1 kg)
Spreading capacity: 6-8 m²/litre 
 
Subfloor levelling

 
975 Europlan Special

Self-smoothing levelling compound for levelling of cement-based and other stony floors in layers up to maximum 8 mm which are to be covered with a floor covering. Roller-castor-chair resistant from 2 mm.
Very low VOC-emission, emicode EC1, self-smoothing, high flow, maximum layer thickness of 8 mm.

Article reference: 975 SAP nr: 31994 Package: 25 kg
Spreading capacity: Approx. 1.5 kg/m² per mm layer thickness. 
 
990 Europlan Direct (dust reduced)

Self-smoothing very high quality levelling compound for levelling of cement-based and other stony floors in layers up to maximum 20 mm which are to be covered with a floor covering. In most cases a primer is not necessary. Roller-castor-chair resistant from 1 mm. Up till 90% less dust. Self-smoothing, low-tension, excellent flow, pumpable, high compression strength, maximum layer thickness of 20 mm, very low VOC-emission, emicode EC1, suitable for use under parquet floors.

Article reference: 990 SAP nr: 34953 Package: 23 kg
Spreading capacity: Approx. 1.4 kg/m² per mm layer thickness. 
 
991 Europlan Direct Rapid

Self-smoothing, very high quality fast drying levelling compound. Suitable for levelling of cement-based and other stony floors in layers up to maximum 20 mm. At 20° C and a relative humidity of < 70%, the levelling compound layer is ready for the installation of linoleum, needlefelt, carpet and PVC floor covering, after 3-4 hours. Roller-castor-chair resistant from 1 mm. Very low VOC-emission, emicode EC 1, fast drying, low-tension, excellent flow, high compression strength, maximum layer thickness of 20 mm, roller-castor-chair resistant from 1 mm.

Article reference: 991 SAP nr: 29603 Package: 25 kg
Spreading capacity: Approx. 1.5 kg/m² per mm layer thickness. 
 
Forbo QuickFit Panels

The Forbo Quickfit system comprises self-adhering MDF panels and damp-proof sound insulating Forbo foam. Forbo Quickfit offers: A rapid, smooth finish. Quick and easy installation. No visible subfloor seams. Excellent moisture barrier. Easily removable. Improved impact sound insulation in combination with Forbo Foam (Δ Lw= 23 dB according to NEN-EN-ISO 140-8 and 717-2)

SAP nr: 60696 Spreading capacity: 3.6 m² per pack, 36 m² per pallet 
 
Forbo Foam

Polypropylene foam laminated with metallised polypropylene foil. The foil top layer incorporates a self-adhesive overlap of 20 cm for secure seams.

SAP nr: 64799 Package: Roll of 25 linear metres PE foam, 100 cm wide, 4 mm thick. 
 
Adhesives

 
540 Eurosafe Special

Solvent-free floor covering adhesive with a high initial grab for the installation of PVC floor covering in sheets and tiles, cushion vinyl, PVC backed carpet, rubber floor covering in sheets and tiles with a smooth back and polyolefin floor covering. Solvent-free, non-flammable, easy and safe to apply, high initial adhesion strength and final bond strength, favourable spreading capacity, roller-castor-chair resistant.

Article reference: 540 SAP nr: 29403 Package: 10 l. (13 kg)
Spreading capacity: 0-350 g/m², depending on the back of the floor covering and condition of the subfloor.
 
 
640 Eurostar Special

Very low VOC-emission floor covering adhesive with a high initial grab for the installation of PVC floor covering in sheets and tiles, cushion vinyl, PVC backed carpet, rubber floor covering in sheets and tiles with a smooth back and polyolefin floor covering.
Very low VOC-emission, emicode EC1, solvent-free, multi-purpose application, easy and safe to apply, favourable spreading capacity, high initial and final bond strength, roller-castor-chair resistant.

Article reference: 640 SAP nr: 29611 Package: 10 l. (12 kg)
Spreading capacity: 225-275 g/m² 
 
641 Eurostar Special EL

Very low VOC-emission conductive adhesive with a high initial grab for the installation of conductive carpet, conductive PVC floor covering in sheets and tiles and conductive rubber floor covering in sheets and tiles with a smooth back.
Very low VOC-emission, emicode EC1, solvent-free, non-flammable, easy and safe to apply, multi-purpose application, high initial adhesion strength, favourable spreading capacity, roller-castor-chair resistant, electrical resistance < 3*105 Ohm (EN 13 415).

Article reference: 641 SAP nr: 53652 Package: 10 l. (12 kg)
Spreading capacity: TKB S1: 260-300 g/m², B2: 300-400 g/m².
 
 
543 Eurosafe Deco

High quality solvent-free adhesive for the installation of PVC strips and tiles on smooth subfloors.
Non-flammable, solvent-free, roller-castor-chair resistant, favourable spreading capacity, no grin through of adhesive trowel marks, easy and safe to apply, high final bond strength.

Article reference: 543 SAP nr: xxx Package: 10 kg bucket
Spreading capacity: 100-150 g/m², on levelled subfloors.
 
 
650 Eurostar Fastcol

Low VOC-emission, solvent-free, powerful dispersion-based contact adhesive with a strong adhesion for the two-sided fixing of carpet on stairs, PVC nosing, PVC adhesive skirting, rubber nosing, hollow skirting of hard floor covering and cork floor covering.
Low VOC-emission, emicode EC2, solvent-free, powerful enough to bear high tensions, high initial adhesion strength, reactivate through warmth, tool included.

Article reference: 650 SAP nr: 77554 Package: 5 l. (7.5 kg)
Spreading capacity: 250 g/m² per coat 
 
Welding

 
Vinylweld

After installation, Forbo's vinyl floorings can be hot-welded for functional, decorative or hygienic reasons. Vinylweld is available in plain colours that perfectly suit the vinyl flooring collections.

SAP nr: 50621 Package: 15 x 42 ml
Colours: all Step and Eternal 
 
Noviweld

Liquid transparent vinyl weld

SAP nr: 82480 Package: 42 ml